We don't just make it, we mill it everyday!

Get unmatched support when you buy Alien Zirconia Blocks from a team of professionals who use these blanks on a daily basis. 

Now you can mill Alien Zirconia in your lab. Experience the highest quality and translucency the Zirconia world has to offer. Over 100,000 satisfied patients, doctors, and labs. 

Available in...

White Zirconia 98mm Puck 

• 98 mm x 12 mm 
• 98 mm x 16 mm  
• 98 mm x 20 mm 
• 98 mm x 25 mm 
• 98 mm x 30 mm 
• 98 mm x 35 mm 

Pre-Shaded Zirconia 98mm Puck (A1-D4)

• 98 mm x 12 mm 
• 98 mm x 16 mm 
• 98 mm x 20 mm 
• 98 mm x 25 mm 
• 98 mm x 30 mm 
• 98 mm x 35 mm 

Compatibility

98mm with a 10mm step. Compatible with Weiland, VHF, Roland, and most open CAD CAM Milling Machines. 

Isostatic Pressing

Each Zirconia Blank is isostaically pressed for consistent results every time. We do not cut corners, as we use the exact same zirconia for our milling services. 

Gentle on your Mill

Alien Zirconia Disks are softer in the green state, than generic zirconia. This extends the life of your spindle, and tools. 

Translucency Factor

High Translucency has become a loosely used term to define the product, rather than the characteristics. The real definition lies in Translucency Parameters (TP), and Contrast Ratio (CR). The Contrast Ratio for Alien Zirconia Blanks are >34:1 CR %, one of the highest translucent zirconia offered in the industry. 

Research

We research, and use 98 mm Alien Zirconia Blanks in our milling center everyday. We know our zirconia is out of this world. Many labs, doctors, and patients may be unaware Zirconia is a radioactive material. Safety is the main focus of the company, and we would not use unsafe materials exposing our technicians to unsafe materials. 

Our Research and Development engineers continually test the zirconia powder for any traces of radioactivity, and makes sure the zirconia is 100% safe every time. 

Sintering Schedule 

 For more programs, including programs for certain ovens, visit the sintering page

Up to 45 Units  Total Run Time: 12-13 Hours

Ivoclar Programat Oven

46 - 80 units  Total Run Time: 16-17 Hours

Warp Speed  5-15 units (Fast Sintering)  Up to 3 Unit bridges only Total Run Time: 2-2.5 Hours

**CAUTION - Please check with your sintering oven manufacture if the oven is capable. Fast Sintering cycles add stress on your oven, causing parts to wear and tear sooner. 

FAST! Full Arch Hybrid Sintering Program (Beta) Total Run Time: 16.5 hours

Full Arch Hybrid Sintering Program Total Run Time: 23-25 hours

Ivoclar Programat Oven