Alien™
Alien Extreme Translucency 98mm Zirconia Blocks
We don't just make it, we mill it everyday!
Get unmatched support when you buy Alien Zirconia Blocks from a team of professionals who use these blanks on a daily basis.
1,000 MPa at 49% Translucency Factor.
Available in...
White Zirconia 98mm Puck
- 98 mm x 14 mm
- 98 mm x 20 mm
- 98 mm x 25 mm
Pre-Shaded Zirconia 98mm Puck (White BL-1 BL-2 A1 A2 A3 A3.5 B1 B2 B3 C1 C2 C3 D2 D3)
- 98 mm x 14 mm
- 98 mm x 20 mm
- 98 mm x 25 mm available only in White, BL1, BL2, A1, A2, A3, and B1
Alien Extreme on the Front Cover of LMT!
Alien CEO, Saro Hatzakortzian, holding the latest copy of the LMT Magazine, featuring the Alien Extreme on the front cover. In his other, he is hodling the most advanced zirconia known to mankind.
Compatibility
98mm with a 10mm step. Compatible with Weiland, VHF, Roland, and most open CAD CAM Milling Machines.
Isostatic Pressing
Each Zirconia Blank is isostaically pressed for consistent results every time. We do not cut corners, as we use the exact same zirconia for our milling services.
Gentle on your Mill
Alien Zirconia Disks are softer in the green state, than generic zirconia. This extends the life of your spindle, and tools.
Translucency Factor
Extreme Translucency at 49%
Research
We research, and use 98 mm Alien Zirconia Blanks in our milling center everyday. We know our zirconia is out of this world. Many labs, doctors, and patients may be unaware Zirconia is a radioactive material. Safety is the main focus of the company, and we would not use unsafe materials exposing our technicians to unsafe materials.
Our Research and Development engineers continually test the zirconia powder for any traces of radioactivity, and makes sure the zirconia is 100% safe every time.
Material Safety Data Sheet and IFU
Sintering Schedule
For more programs, including programs for certain ovens, visit the sintering page
Up to 45 UnitsTotal Run Time: 12-13 Hours |
 |
| Step | Start Temp C | End Temp C | Rate Climb / min | Time (mins) |
|---|---|---|---|---|
| 1 | 0 | 900 | 10 | 90 |
| 2 | 900 | 900 | 0 | 10 |
| 3 | 900 | 1540 | 3 | 214.00 |
| 4 | 1540 | 1540 | 0 | 150 |
| 5 | 1540 | 0 | 0 | Natural Cooling |
46 - 80 unitsTotal Run Time: 16-17 Hours |
 |
| Step | Start Temp C | End Temp C | Rate Climb / min | Time (mins) |
|---|---|---|---|---|
| 1 | 0 | 900 | 6 | 150 |
| 2 | 900 | 900 | 0 | 30 |
| 3 | 900 | 1540 | 3 | 214.00 |
| 4 | 1540 | 1540 | 0 | 270 |
| 5 | 1540 | 0 | 0 | Natural Cooling |
Warp Speed 5-15 units(Fast Sintering)
|
 |
| Step | Start Temp C | End Temp C | Rate Climb / min | Time (mins) |
|---|---|---|---|---|
| 1 | 0 | 1540 | 35 | 44 |
| 2 | 1540 | 1540 | 0 | 60 |
| 3 | 1540 | 300 | 45 | 28 |
**CAUTION - Please check with your sintering oven manufacture if the oven is capable. Fast Sintering cycles add stress on your oven, causing parts to wear and tear sooner.
Full Arch Hybrid Sintering ProgramTotal Run Time: 23-25 hours |
 |
| Step | Start Temp C | End Temp C | Rate Climb / min | Time (mins) |
|---|---|---|---|---|
| 1 | 0 | 900 | 6 | 150 |
| 2 | 900 | 900 | Hold | 30 |
| 3 | 900 | 1540 | 3 | 214.00 |
| 4 | 1540 | 1540 | Hold | 270 |
| 5 | 1540 | 1300 | 0 |
Natural Cooling |
| 6 | 1300 | 1300 | Hold |
120 |
| 7 | 1300 | 1200 | 0 |
Natural Cooling |
| 8 | 1200 | 1200 | Hold | 120 |
| 9 | 1200 | 1100 | 0 | Natural Cooling |
| 10 | 1100 | 1100 | Hold | 120 |
| 11 | 1100 | 1000 | 0 | Natural Cooling |
| 12 | 1000 | 1000 | Hold | 120 |
| 13 | 1000 | 900 | 0 | Natural Cooling |
| 14 | 900 | 900 | Hold | 60 |
| 15 | 900 |
0 | 0 | Natural Cooling |
Customer Reviews
- Reviews
- Questions
- company
- worries
- introduction
- volume
- owner
- region
- stuff
- unit
- dentition
- labor
United States
Still the most esthetic with all the strength
Always used in the anterior region with no worries about fracturing. Highly esthetic and is my highest volume zirconia since its introduction.
United StatesAlien HT is perfect for dark stumps and full titanium abutments
I just started using this zirconia especially over full titanium custom abutments. It really blocks the dark values from the metal. It especially helps when it has to be an anterior lower or a #7 or #10 where the abutment is too small for a hybrid design. It keeps the tooth natural and healthy looking with a neutral value that matches the surrounding dentition. Great stuff.
United StatesSo far I love working with this Zirconium. Good aesthetics and excellent resistance
United Statesgreat service
product is great.next day delivery and nice gift.thank you
United StatesExcellent optical properties and enduring strength
I use It in the posterior as well as the anterior. I can make it look layered and not worry about fracturing.
