Alien Full Arch Hybrid Zirconia Bridge - $599 – Alien Milling Technologies
Call 844-ZIRCONIA | Mon-Fri 8am-4:30pm PST
Cart 0

Alien™

Alien HT Implant Full Arch Hybrid Zirconia

$ 649.00

Alien Full Arch Hybrid implant Bridge with option of Gingiva Staining. This product is milled from Alien HT Zirconia, rated 1,200 mpa. It is capable of restoring cases up to 16 units.


Now Available in Green State 

Order your Full Arch Hybrid in the Green State for further characterization in lab. 

You must have a Sintering Furnace with a High Temp of1540 degrees Celcius.  

Please refer to our Sintering Parameters

 


GC Luster Paste Firing Parameters (Pink Gingiva) 

Gingival Shades

 GC Luster Paste

 

 

 

 

 

 

 

 

 

 

 

 

     

Wash Firing Instructions 

Step  Value
Entry Temp 400º C
Dry Time 8 Minutes
Rate of Climb  35º C
High Temp 840º C
Hold  1 Minute
Vacuum On  450º C
Vacuum Off 839º C
Exit Cool Time 25 Minutes

 

Stain Firing Instructions 

Step  Value
Entry Temp 400º C
Dry Time 6 Minutes
Rate of Climb  35º C
High Temp 820º C
Hold  1 Minute
Vacuum On  None
Vacuum Off None
Exit Cool Time 25 Minutes

 

 

Customer Reviews

Based on 14 reviews Write a review

Share this Product


Other great brands

QUESTIONS & ANSWERS

Ask a Question
  • What is the average turn-around time for this product?

    4-7 Lab Days depending if we design or from your STL File.
    https://www.alienmilling.com/pages/turnaround

  • You milled and finished for me a direct to MU bridge with Rosen screws. Screw seats were perfect! Can alien also mill direct to MU bridges with Powerball and Dess 19.018? Thanks!

    We can do the Powerball, but not the Dess yet.

  • What does the Full arch hybrid zirconia ($599) come with? Are you only milling it? Thanks.

    Yes the price is for Mill Only. If you choose design or finishing options, the price will change accordingly.

  • Hello, I already have the MU abutments installed on the implants. How do I take a digital impression?

    You will need the NT Trading MUA Scan Bodies. 
    Depending on the size of the screw channel, NT Trading makes 
    1.4mm MUA Scan Body
    1.6mm MUA Scan Body
    1.8mm MUA Scan Body

  • In the bite registration, should I have determined the mean line and the size of the pieces to be replaced? If not, how do they determine it?

    Normally, a scan of the temporary, or exisiting will be included as a pre-op. 
    If not, You can specify the lenght and width of the centrals.

  • For the zirconia if selecting gingival staining and finishing, when we send the STL, should there be a cutback and how much, 1.5mm?

    We do not add porcelain, so essentially 0mm. We add a Gingival Stain with Miyo Stains by Jensen Dental.

  • If I send a wax up for full arch zirconia, what is the price for pmma version and zirconia version? Four Implants. 12 teeth. Turn around time?

    Hi There, 

    All of our prices are listed online.
    Please see the Full Arch Hybrid PMMA pricing here
    and the Full Arch Hybrid Zirconia pricing here
    As you can see we have 3 different types of Zirconia. The HT, ML, and the Extreme. 

    The slips are dynamic, and will add extra fees based on design, and finishing services. 
    Please configure a presciption and add it to cart to see the total price. 

    Full Arch Hybrid cases can take between 4-10 days depending if it is all digital, or a combination of both. 
    Please see our turnaround times here 

    Thank you 

  • I have a zirc roundhouse with adin multi unit platform which is compatiable with nobel multi unit, it's not listed on your list of implants. can i still send this case to you also i've never used your zirc before. Would you recommend the Ht Implant? is that zirc multilayered or just one flat shade from cervical to incisal and is there any translucensy?

    Hi there, 
    Since your implants are compatible with Nobel, I would select Nobel Active from the List. 
    The HT is a monochromatic Zirconia. If you want Multi-Layer I would suggest the Alien Multi-Layer Full Arch.
    If you want outstanding translucency, and bleach shades, I would recommend the Alien Extreme Full Arch.

  • Hi, do you used C clamp disc holder for milling full arch ?

    As of 2-24-20 we are beta testing the C Clamp. 
    We do not have a set implementation date for the C Clamp yet. 

    We will announce it once it is in full production.

  • when you ship the final zirc hybrid with staining and everything done, do you insert the metal housings to mate with the MUA?

    As of 2/11/2020 we do not. 
    But this is a service we will be implementing in the future. 
    Thank you

  • I have a patient that is currently in a pmma temp-I would like to go to a zirc finish-what data do you need from to go to finish

    We need the STL File of the CAD Ready Restoration.

  • For this restoration, would the pink gingival staining be done by you? Is that an available option for additional fee?

    Yes we can do Pink Gingival. 
    You will need to select sintering option first to be able to choose pink staining.

  • whats turn around time on a model zirconia coping or full zirconia crown

    Please see our most current turnaround schedule here. 
    https://www.alienmilling.com/pages/turnaround

  • Do you have spanish support ?

    Yes please call us at 844-947-2664. Ask for Spanish support.

  • can i send models instead of file

    No we  do  not   offer  design  services  for  this restoration.

  • upload stl file is final restoration only? or with cutback data and etc.? (i want finishing gingiva stain and graze.)javascript:void(0)

    Final Restoration.

  • Are you able to mill large hybrids that would need a size 30mm puck

    Yes 

  • Hybrid zirconia is Zirconia+gingiva or Zriconia+ceramic+gingiva?

    Zirconia with Gingiva one piece 

  • Ti base is included with this price?

    No this price is for the zirconia restoration only. 

  • Can we replace implant sustained overdentures with a Trilor bar and Implant full arch hybrid zirconia. Is it compatible with older implants?

    The Tri-Lor is a great substitute for overdent bars. 
    The compatibility depends on the Designer's CAD Library. 

  • What happens if the prosthetic does not fit the model?

    We recommend ordering a Verification Jig prior to starting a Full Arch Case.

  • What is minimum thickness and recommended restorative space required?

    10-14mm

  • Are you able to mill for implant direct copings?

    We can mill for almost any part, but we can only design for dess parts.
    As long as it is from your design, we should be able to mill it.

  • If we've designed provisional on excoad and printed it. What files do we need to send you? We used dess screws and elos scanbodies for printed provisional.

    If you want a 100% identical copy of the provisionals, you can send the same STL Files. 
    If you want us to re-design it with Ti-Bases, you will need to select "Upload Jaw Scans - Design Service" and send us all of the files including Scans, and Designs. 

    Thank you